If you would like to bid on any of the items listed here, and are currently not a member of eBay, click this link here and join! It's easy and FREE!
Equipment/Supplies/Everything Else
Car, Motorcycle, ATV Parts and Tools
Unknown Things--Really
Weird
Stuff We Can't Identify!
Equipment/Supplies/Everything Else
Homelite Leafblower Vacuum Bag
Minor dirt accumulation, in excellent condition.
Awesome Vintage Green AMF Tricycle
28 inches tall, 32 inches long, 20 inches wide.
In good condition. Left tire is missing tread, and right pedal is missing part of the plastic. Not ridable as is, but would be easy to fix up if you want. We thought it would be a great display piece for our collection, but it was too tall to fit in our display area. Our loss, your gain! Will disassemble for shipment to fit into smaller box.
Blue Stained Custom Craft Golf Clubs For Display Beautiful!
These two golf clubs, #1 and #3, would make a fantastic display on
your
golf-themed wall. They are really works of art! The driver
looks like it has one or two swings, and the #3 wood has no visible
marks
at all. Swing Rite / Grip Rite grips also appear as new.
John Steinbeck First Day Issue Envelope w Stamp
White's Coinmaster 6000 Metal Detector w/ Accessories Needs Work
My stepfather, now passed on, gave me this setup, and it was working when I put it in the attic a few years ago. After a few years, I tried to get it to power up, and it wouldn't. Maybe you know how to fix these things, or maybe it's good for parts. It would not work for me, and I do not know how to fix it.
Comes with a leather belt to attach the heavy part to your body, then you swing the lighter wand by itself. Also includes a stainless steel sand scooper and headphones.
SOLD
15 lbs
Car Motorcycle ATV Parts
and
Tools
Holley Carburetor 390 cfm LIST 6299-1 Rebuilt Wet Flowed
I purchased this carburetor used at a swap meet, and there were a few odd things done to it. I was able to correct most of those things, except the planing of the primary metering block. Someone machined it flat, and in doing so, cut off the gasket locator tabs. This makes it a bit difficult to put the gasket in place, but if you assemble the bowl and screws all together, it all lines up using the bowl screws.
Carburetor has #50 jets, #25 squirter, 6.5 power valve, manual choke, vacuum secondaries, factory correct secondary metering plate.
I cleaned and reassembled the carb using a Holley Quick Kit. Then, I mounted the carb on my 390 engine and set the floats and idle mixture, and drove it. It works just fine.
I am the host of the Holley Carburetor Tuning Page, where I give free advice to people with Holley tuning issues, so you can be assured this carb was rebuilt professionally, even though I don't rebuild carbs for a living.
SOLD!
1963 Ford Motorcraft 2100 Carburetor 2 Barrel Excellent!
This carburetor was on my own personal 1963 Mercury Meteor 260, and it ran absolutely perfectly the whole time I used it, which was only two tanks of gas. I took it off only after the engine started knocking. At that point, I put in a 302 with a 4 barrel, and this carb became excess. I am a master auto mechanic and author of the Holley Carburetor Tuning Page (do a Google search for that and you'll find me) and rebuilt this before installing it. You can be assured that if your engine is sound, this carburetor will be one of the best running and idling carbs you've ever seen. The outer vent hole has been closed to prevent evaporated fuel from staining the outside of the carb. This blocked vent does not affect the function of the carb.
The metal tag has these numbers: C3OF F B2 HB, and the base has C2OF N stamped in it.
Comes with factory vacuum advance tube and PCV spacer.
SOLD
8 lbs
63 Mercury Meteor Ford Power Steering Throttle Linkage Actuator
This is a little device that bumps up the throttle on the car when
you turn the steering wheel. It only works on a factory intake
manifold, and when I switched to an aftermarket intake, I couldn't use
it again. Removed from my own car, a 2 barrel 260.
May work on other Ford and Mercury cars of that era. Comes with
linkage, piston, and hose, all of which functioned perfectly while they
were on my car.
5 lbs
v
1964 to 1966 Ford Mercury 260 289 Valve Covers Nice!
These are factory valve covers for a Ford 260 or 289 engine with PCV
in the valve cover. I cleaned these, painted them, and put new
gaskets on them, and used them for only about 2 tanks of gas, before
the engine started knocking. My replacement engine had different
rocker arms, so these would not fit any longer. In excellent
condition. Paint color is 63 Ford 260 Red.
14 lbs
Ford Early 60's Air Filter w/ New Element NICE!
This air filter is used on a lot of different early 60's Fords, and
is in excellent condition. Element is new. I ran about 2
tanks of gas through my car before the engine started knocking, and
then I put custom valve covers and a chrome air filter on the
replacement engine. Comes with factory wing nuts on
snorkel. Color is 63 Ford 260 Red.
14 lbs
1976 Ford Pinto Stallion Grille Factory Black NICE!
I removed this from a 1976 Pinto Stallion in a junkyard, and it's in
amazing condition. The black paint is factory applied, and in
very good condition. The lenses are excellent and come with the
light sockets.
The grille is correct for a 76 Pinto, but will fit 74 and 75 models also.
71 73 Ford Pinto 2.0 Motor Mounts Used
I found these in some old Pinto parts I had lying about. In ok condition, with some cracking.
7 lbs
71 72 73 Ford Pinto 2000 2.0 Manual Flywheel Fair
I found this in some old Pinto parts lying about. It was on an
engine I put into another car, and worked fine when removed. May
need a new ring gear, worst of damaged area shown.
30 lbs
Ford Pinto 2.0 2000 Distributor & Cap & Wires
In excellent condition, removed from a running engine years ago, stored indoors.
5 lbs
Ford Pinto Two Blade Fan
Removed from a 2.0 Pinto engine, in good condition.
3 lbs
Ford Pinto 2.0 2000 Dipstick
Good condition.
1 lb
Ford Pinto 2.0 2000 Upper Alternator Bracket Pass Side
This alternator bracket uses the two thermostat housing bolts to mount to the engine, on the passenger side.
3 lbs
71 72 73 74 Ford Pinto Battery Shield
Removed from a 74 Pinto, in fair condition. May be usable on newer models, but I'm not sure.
3 lbs
Mercury Interior Panel Fair
1973 73 Mercury Cougar Grill Fair Condition Grille
Lower passenger side has a minor break and a bend. I removed
this
from a car in a junkyard, and the damage was not even noticeable until
I removed the part. Not concours, but definitely a good driver
quality
piece.
1969 Mercury Cougar Hood Latch & Vacuum Motor Assembly
Removed from a 69 Cougar in a junkyard, in fair condition. Uprights were bent, and I straightened them to the best of my ability without having a car to trial fit. Some of the places where it bent have tears in the metal. The vacuum motor shaft has been welded by someone in the past. I put a vacuum pump to the lower fitting, and it held a vacuum very well. The upper fitting moved the shaft up only if I used my mouth to provide enough vacuum, and the vaccuum did not hold. Definitely not a show quality piece, but maybe it's better than what you have now.
1969 69 Mercury Cougar Vacuum Reservior Under Fender
Removed from a 69 Cougar in a junkyard, may fit other years as well. This unit goes underneath the passenger side fender. I applied vacuum to the small fitting, and it held well. When I applied vacuum to the larger fitting, I could not get a vacuum to hold. I don't understand the operation of this unit well enough to say whether it is working correctly or not.
NOS Mustang Hood Latch
65 Ford Fairlane 4-Door Sill Plates Set of 3
May fit many other models and years of four door cars. In good condition.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=260096785846
75 77 Ford Mustang II Wheel Center Cap
Part # D5ZZ-1130-B, in excellent condition.
62 63 Ford Fairlane Mercury Meteor Padded Dash Trim
Metal trim removed from padded dash on a 63 Mercury Meteor. Stainless steel with attaching clips. In excellent condition.
68 up Mercury Ford Wing Window Crank Short Ginger
Removed from a 68 Mercury full size car, this is the front wing window crank. Chrome in very good condition. One is missing its knob, but these are available aftermarket. Remaining knob in good condition, color ginger. Sorry, no adhesive screw covers, which are available aftermarket for $1.50 each.
Make offer
68 up Mercury Ford Window Cranks Ginger Pair
Removed from a 68 Mercury full size car, these are two front or rear main windown cranks. Chrome in fair condition, with some pitting. Knobs in good condition, color ginger. Screw covers included, but could use some more adhesive at next installation.
Make offer
Early Ford Thunderbird Tbird V8 Red Emblem 55 56 57
I am not sure of the application of this emblem, but it seems to have the part number of a mid-50's Ford part. In good condition, minor pitting. Has all three posts. Part number BJ-16229-A
Make offer
67 72 Ford F250 Camper Special Fuel Tank Gauge Switch
The switch does not work properly, but the mounting bracket, ID
ring,
nut, and pigtail are in good condition. I had this switch in my
truck,
and it works intermittently. If you need the mounting parts, or
have
a way to fix this switch, it might be useful to you.
REPEAT--Switch
does not work properly--only functions intermittently.
Make offer
Ford FE 427 428 390 Valvespring Oil Shields Pair
In excellent condition, no sludge, ready to install.
Make offer
Ford 428 390 FE Hydraulic Rocker Arm Shafts Fair
Pair of rocker shafts from hydraulic lifter engine. Rockers in poor condition at the valve interface, most will need to be replaced. Stands in excellent condition, shafts appear to be in good condition. I pulled the spring loaded rockers away from their normal positions, and the shafts appear good in those locations. I did not disassemble any further.
Make offer
Ford Touch Up Compound Med Blue Metallic Used
Package opened, but not used much. Compound inside is still in excellent condition.
Make offer
Metal Honda Goldwing Motorcycle Tank Emblems Pair NOS!
New, in very good condition. Not perfect, due to very minor scratches from storage. These metal emblems are approximately 8 inches long, 1 inch high, and have an approximate 3-1/2 inch spacing from mount hole to mount hole.
Disc Brake Pads Vintage NOS!
Part number 732R. Application unknown. Do you know what these fit?
Make offer
66 67 Ford Fairlane Window Cranks 4
Set of 4 window cranks for a 66-67 Ford Fairlane. May fit Mustang and other Ford cars as well. Three in good condition, one looks like a dog or small child chewed on it. Includes three rub blocks.
Make offer
Ford 2.0 Pinto Water Pump Pulley and Fan Spacer
Single groove pulley and fan spacer.
Make offer
2.0 Ford Pinto 2 Blade Fan
Solid fan for an early 2.0 Pinto. Came off my car, so I can guarantee it is straight.
Make offer
Ford 2.3 Pinto Mustang Water Pump Pulley and Fan Spacer
Part number D4ZE-AA, 5-1/2 inches diameter.
Make offer
Echlin ST 100 Solenoid NOS
Anyone know what this fits?
Make offer
1960's Yamaha YG1 80 2 Stroke R Side Engine Cover NOS!
May also fit 50 100
Exact application unknown. Bid only on your knowledge of this part!
Definitely from a rotary valve type engine. Appears to be new, due to lack of marks from any bolts or plugs. Has these numbers written on a paper tag: 126-15421.
Available. Make offer
Ford C6 FE 427 428 Trans Inspection Cover
Fits all FE C6 applications. In excellent condition, repainted and ready to go!
If you would like to bid on any of the items listed here, and are currently not a member of eBay, click this link here and join! It's easy and FREE!
For more details on any of these items, email me!
Questions?
All photographs and content on this website are copyrighted by the author. Unauthorized reproduction is strictly prohibited!